Support for legacy products

The Model 306 VOC Analyser

Support can be provided for the Model 306 instrument. Although many of the component parts are no longer readily available we have a number of parts available for routine maintenance and repairs with the exception of the sensor head. However new sensor heads can be manufactured by our team if this proves to be necessary. We are also able to give advice in the use and operation of this instrument

 

 

The operating software for this instrument was designed to work with a computer running on the Windows XP operating system. This operating system is now obsolete and no longer supported. Unfortunately the Model 306 instrument cannot be converted to work with later versions of RoboScientific software as the newer models use completely different data acquisition systems.

 

 
OdourSpace E-nose Analyser

Support can be provided for the OdourSpace instrument. Although many of the component parts are no longer readily available we have a number of parts available with the exception of the sensor head. However new sensor heads can be manufactured by our team if this proves necessary. We are also able to give advice in the use of this instrument

 

 

The operating software for this instrument was designed to work with a computer running on the Windows XP operating system. This software is now obsolete and so cannot be supported. The OdourSpace cannot be converted to work with later versions of RoboScientific software as the newer models use different data acquisition systems.

 

 
Bloodhound BH114 VOC Analyser

Unfortunately support for this model is no longer available because many of the key components are obsolete and thus cannot be obtained. Advice in the use of this instrument is still available but we cannot support the hardware or the computer software. Under some circumstances it may be possible to replace damaged sensors but this in an expensive exercise. Contact us if you need to discuss this eventuality.